C\ Gabiria nº 112-114-146 Pº Ventas
20305 Irún (Guipúzcoa) SPAIN
Tel.: +34 943 633 562 | Fax: +34 943 633 285
E-Mail: conatec@conatec.com

C\ Gabiria nº 112-114-146
Pº Ventas 20305
Irún (Guipúzcoa) SPAIN
Phone. +34 943...  see telephone
Fax. +34 943...  see fax
E-Mail: conatec@conatec.com



Programadores PID 4900Programme regulator configurable by keyboard specifically designed for the control of processes in thermal treatment furnaces with one or two regulation zones.

General Characteristics

  • Simultaneous control of one or two regulation zones depending on the model.
  • Control profile with four steps plus waiting time.
  • PID control.
  • Permanent display of the variable for each zone.
  • Temperature-programmable auxiliary output.
  • LED display the control output action.
  • Input type configurable by keyboard for thermocouples K and S.
  • Adjustment of the measurement offset.
  • Start – stop station.


  • Power supply 230 Vac +/- 10%. Consumption 8 VA.
  • Potential-free relay outputs with cut-off capacity 5A/230Vac in a resistive load.
  • Protection against sensor break.


  • Format 96x96. Panel cut-out 92x44 + 0.8 mm.
  • Depth 140 mm including the connection terminals.
  • Front protection IP54.
  • Rear protection IP20.
  • Operation between 0 and 60ºC and between 0 and 80% of RH.
  • Storage conditions between 10 and 60 ºC.
Attached archives:

We use our own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept the use.
You can change the settings or get more information here.