C\ Gabiria nº 112-114-146 Pº Ventas
20305 Irún (Guipúzcoa) SPAIN
Tel.: +34 943 633 562 | Fax: +34 943 633 285
E-Mail: conatec@conatec.com

C\ Gabiria nº 112-114-146
Pº Ventas 20305
Irún (Guipúzcoa) SPAIN
Phone. +34 943...  see telephone
Fax. +34 943...  see fax
E-Mail: conatec@conatec.com



The 8400 controller is configurable by the manufacturer aimed at the control of different types of static or rotary ovens used in baking and confectionary.

General Characteristics

  • Temperature input for thermocouple J.
  • Range of 0 ÷ 400ºC with pilot light for the operating burner.
  • Programmable cooking timer.
  • Timed steam injection when executing the manual steam cooking and injection cycle.
  • Timed / fixed on and off for the oven light.
  • Burner on and off during the cooking cycle.
  • Activation of the turbine with the oven in operation.
  • On and off of the gas extractor.
  • Display for anomalies and ends of stroke.
  • Depending on the set-up:
  • Timed operation of hatches.
  • On and off of direct outlets.
  • Activation of outlets for rotating two trolleys.
  • RS485 communication for connecting to SW6000.
  • Plastic box with frame for panel mounting.


  • Power supply 24 Vac +/- 20%. (50-60 Hz)
  • Electric consumption: 5VA.
  • Maximum load for outputs mA with 500 ohm.
  • Maximum consumption for outputs 0/2-10 v with 10 mA.
  • Potential-free relay outputs with cut-off capacity 5A/230Vac in a resistive load.
  • Protection against sensor break.


  • Format 250x125 mm.
  • Depth 80 mm. including the rear plastic cover.
  • Front protection IP65.
  • Rear protection IP20.
  • Operation between 0 and 60ºC and between 0 and 80% of RH.
  • Storage conditions between 10 and 60ºC.


Attached archives:

We use our own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept the use.
You can change the settings or get more information here.