C\ Gabiria nº 112-114-146 Pº Ventas
20305 Irún (Guipúzcoa) SPAIN
Tel.: +34 943 633 562 | Fax: +34 943 633 285
E-Mail: conatec@conatec.com
CONATECwww.conatec.com

CONATEC
C\ Gabiria nº 112-114-146
Pº Ventas 20305
Irún (Guipúzcoa) SPAIN
Tel.: +34 943 633 562
Fax: +34 943 633 285
E-Mail: conatec@conatec.com


Cookies

8900

The controller is intended for supervising and automating the different variables which are used in the operation of paint booths or similar.

General Characteristics

  • Visualisation using LCD graphic display with high contrast and brightness with a resolution of 64x128 pixels.
  • It uses 2 temperature inputs of Pt 1000 to measure 2 points in the booth. One is used for the regulation of the booth temperature. The other probe measures the maximum or minimum alarm temperatures.
  • It has the possibility of measuring the temperature of the part to be painted using a third Pt 1000 probe.
  • Possibility of measuring the booth pressure using an internal pressure sensor or an external converter with 4/20 mA.
  • It includes two built-in differential pressure sensors to detect the correct condition of the filters.
  • This allows measuring the relative humidity of the booth.
  • By configuring the analogue control equipment signals there is allocation to each of the four analogue outputs with 0/10 V.
  • Direction operation using a relay of up to 4 lines of lights inside the booth.
  • RS485 output for communication with SW6000.

Electric

  • Power supply 24 Vac +/- 20%. (50-60 Hz)
  • Electric consumption: 5VA.
  • Outputs by relay 3 Amp. 230VAC potential-free.
  • Analogue outputs at 0/10 V.
  • Voltage output +24Vcc maximum load 75mA for supplying external converters.
  • Temperature inputs probe type Pt1000.
  • Inlet of RH for the sensor with power supply +5 Vcc.
  • Signal inputs from linearised transmitter 4...20 mA with incorporated power supply 24Vcc.
  • Direct inputs of differential pressure sensors.

Mechanical

  • Format 300x230 mm.
  • Depth 60 mm including the connection terminals.
  • Front protection IP65.
  • Rear protection IP00 (interior protection recommendation).
  • Operation between 0 and 60ºC and between 0 and 80% of RH.
  • Storage conditions between 10 and 60 ºC.

 

Attached archives:
Print  Print Send by Email  Send by Email

We use our own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept the use.
You can change the settings or get more information here.