C\ Gabiria nº 112-114-146 Pº Ventas
20305 Irún (Guipúzcoa) SPAIN
Tel.: +34 943 633 562 | Fax: +34 943 633 285
E-Mail: conatec@conatec.com

C\ Gabiria nº 112-114-146
Pº Ventas 20305
Irún (Guipúzcoa) SPAIN
Phone. +34 943...  see telephone
Fax. +34 943...  see fax
E-Mail: conatec@conatec.com


HC 300

HC300  - Sectores y equipos específicos -  Cerámica y Fusing Program regulator

Designed to be used in electric, gas and diesel ovens which require processes with different temperature levels.

General Characteristics

  • Box or panel assembly.
  • Capacity to store up to 9 programs, each made up by an optional waiting time and a maximum of 18 segments. Each segment has a ramp and a plateau to maintain the temperature.
  • A control output and two configurable alarms.
  • Configurable to control motorized valves by means of two relays without recopy or with 4-20mA output.
  • Permanent display of the temperature reading, the segment being performed, the state of the output control and the two alarms.
  • Dynamic graph of the program execution.
  • Possibility to program the gradients in ºC/h or by temperature and time.
  • PID regulation or ON/OFF with adjustable hysteresis.
  • Indication of broken thermocouple.
  • Indication of power failure.
  • Indication of inverted thermocouple.
  • Configurable for K, S and R thermocouples.
  • Calculation of energy consumption.


  • Power: 230VAC. +/-15%.
  • Consumption: 3VA.
  • Output controls with static relays 1A-24/230VAC.
  • Recommended operating temperature between 0 and 60ºC.
  • Relative humidity of operation between 0 and 80% without condensation.
  • EC standards.


  • Vertical format.
  • Medidas 102x166x50mm.
  • Front protection once mounted IP54.


Attached archives:

We use our own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept the use.
You can change the settings or get more information here.